|
This is ONE PIECE (1) new good quality aftermarket RIBLESS (RIB-not-required) programming cable for:
Kenwood Handheld Radios TK-240, TK-250, TK-260, TK-260G, TK-270, TK-270G, TK-272G, TK-278, TK-278G, TK-340, TK-350, TK-353, TK-360, TK-360G, TK-370, TK-370G, TK-378, TK-378G, TK-430, TK-431, TK-2118, TK-3118, TK-2100, TK-3100, TK-3101, TK-2102, TK-2107, TK-3102, TK-3107 .
Kenwood Mobile Radios TK-7102, TK-7108, TK-8102, TK-8108, TK-760, TK-760GK (read risk next paragraph), TK-762, TK-762G (VHF 8Ch), TK-768, TK-768G (VHF 128Ch), TK-780, TK-840, TK-840UF, TK-860, TK-860G (UHF 128Ch), TK-860H, TK-862, TK-862G (UHF 8Ch), TK-868, TK-868G (UHF 8Ch), TK-868G (UHF 128Ch), TK-880
This programming cable has a RJ-11 six conductor cable, and the TK-760GK uses a RJ-45 eight conductor cable. After testing in a local radio repair shop, it was found that the older six conductor cable will insert into and program the newer eight conductor radios. Please use this information at your OWN RISK.
The above may contain typo due to cut and paste. Please verify with the pictures shown below!!!
I know it also works with other Kenwood radios, but there is just too many Kenwood models; I just cannot remember all of them. Bidder is therefore responsible for his/her own purchase decision. I tried to show everything in fine details in the following pictures, hopefully you won't make any wrong purchasing decision.
|
