|
Picture 1: What you see above is what you get.
PRODUCT DESCRIPTION
Offered here is a THREE (3) new good quality COMBO of  RFID Access Controller & RFID Card that permits door access via password or RFID card or both.
Package comes with
-
Water resistant RFID   Access Controller made of stainless steel, ideal for outdoor use; and with networking function.
-
RFID Card Reader  . Click this icon  to view the manual.
-
PDF manual will be emailed to buyer after purchase.
-
One RFID Card (click icon  to buy more)
-
One RFID Key Chain(click icon  to buy more)
-
Electric door exit switch 
-
Electric Door strike  with NC (Normally Closed) and NO (Normally Opened) function and also live remote monitoring function.
KEY FEATURES OF ACCESS CONTROLLER :
|
Picture 1: What you see above is what you get. For this particular network capable RFID controller model, the bell button shown at the bottom left hand corner of the dial pad is only for cosmetic purpose, it does not serve other purpose.
|
Package comes with
-
Water resistant RFID Access Controller made of stainless steel, ideal for outdoor use.
PRODUCT DESCRIPTION
Offered here are THREE (3) new good quality RFID Access Controller & RFID Card that permits door access via password or RFID card or both. This unit also has networking function. Buyer needs to buy this optional controller cable  . Please note that you only need one cable to control up to eight RFID controller from your PC with an RS232 port.
KEY FEATURES:
Options to open door includes:
1. Password Only
2. RID Card Only (RFID token ( or ) you can register and deregister various RFID Card/passwords ( i.e. if you need to deactivate someone's access)
3. Password & RFID Card /token (click icons to purchase)
Three user levels: Normal user, Secure user and Master user
Three operational modes: Normal mode, Bypass mode and Secure mode
"Code search" feature that helps make maintaining user codes easier
Input for Request to Exit (REX) button
Comes with mounting template for easier installation
Strong die cast stainless steel, weather resistant stainless steel housing. Case and Back are all tamper proof; in case of tampering (the case is opened or removed from the wall), the unit will emit an alarm electrical signal to optional attached bell/chime/siren or strobe device to warn about tampering by an intruder. The siren time can be programmed to last 0 to 9 minutes.
Includes door close/open status monitoring function, so that you can monitor online whether your door is open or close. Will work with this electric strike that comes with monitoring function:
TECHNICAL SPECIFICATION:
Electrical Characteristics
Operating Voltage?F12 V DC
Operating Input Current:
standby: 65mA
Maximum: 120mA
Outputs:
Lock Strike Relay Output: 2A Relay
Lock Strike Power Supply: 12VDC constant voltage
1.2 A current limit
Auxiliary Relay Output: 1A Relay Closed to Ground
Reader Power Supply : Voltage: 12 VDC
Max Current: 300mA
Inputs:
Release to Exit (REX): N.O. Dry Contact
Door Monitor: N.C. Dry Contact
Will handle up to 2400 users
Reader Input: 26-Wiegand Compatible. For more information, please click this icon
Indicators & Enunciators
Visual: Two Tri-Colored LEDs
Audio: Built out Sounder (Bell, Chime & Sire )
Piezoelectric
Key Features
Environment Characters:
Operating Temperature: -31??C---63??C
Operating Humidity: 0 to 95% (Non-condensing)
Mechanical Characters:
Appearance Dimensions?FL120MM*W76MM*H27MM
Weight: 410g,Metal shell, Rainproof Equipment
Line Specifications:
RS485:shield or non-shield twisted-pair,22Gage ,link cable lines within 1200 meters.
Key feature
Built-in non-contact reader (125 KHZ, ASK Modulation)
Built-in programming keypad
External Siren
Networkable up to 8 doors
RS485 PC Programming Interface. Please note that buyer needs to buy this optional RS485 to RS232 controller cable . You only need one cable to control up to eight RFID controllers. Other types of RS485 to RS232 converter available in the market will not work with this RFID controller.
Multi-language PC software
Programmable PC software access control rights
Real-time System Control
2000 Event History stored inside the device
Real-time Clock & Upload Automatically
8 Programmable Access Time Zones
No. You can see your picture and consider what are you doing now
24 Programmable Holiday Dates
Support Wiegand 26 Readers For more information, please click this icon
Three Modes of Operation
Normal /Secure /Bypass Mode
Lock Strike Relay output
Auxiliary Relay output
Request to Exit (REX)button
Door Monitor
Forced Door and Door Ajar Detection
Two Status/Programming Interface LED?fs
Back-up Realtime clock Battery
Bell,Chime, & Strobe annunciator
Programmable Lock Strike & Auxiliary Relay release time
===============================================
The following is specifications for the electric strike included in this listing:
BRAND NEW door electric strike with
NO (Normally Opened) and NC (Normally Closed) function and live remote monitoring function. You can manually switch the electric strike from NO to NC. Here is how:
Please refer to the photo above.
Remove the two screws as shown by the two red arrows. After that, pull or push on the black cable as shown in the yellow circle. If you push the cable in, you get NC; pull and you get NO. After that, replace the screw to lock the position onto either NC or NO as you desired. |
|
This strike also has a monitoring function. This function will send a signal to your access control unit (such as this  or ) to inform the unit about the status of the strike, whether it is in "close" or "open" position. Please note that your access control unit must have this monitoring and TCP/IP networking capability to utilize this function. Our access control module (click this icon or to buy it) does have this monitoring function.
Cable connection instruction:
1. White cables: If you set the strike to NO, then connect the white cables to NO and ground of your intelligent power supply. If you set the strike to NC, then connect the white cables to NC and ground of your intelligent power supply.
2. Yellow cable connects to COM or ground socket inside your access controller such as
3a. If you set the electric strike to NO, then the orange cable is useless, and connect the dark blue cable to the signal port of your access controller. In the case of this controller, you connect to "SEN" port ("SEN" means sensor). In the case of this controller, you connect to JP9 and JP10 (Jumper 9 and 10) .
3b. If you set the electric strike to NC, then the dark blue cable is useless, and connect the orange cable to the signal port of your access controller. In the case of this controller, you connect to "SEN" port ("SEN" means sensor). In the case of this controller, you connect to JP9 and JP10 (Jumper 9 and 10) .
Hence, when the strike is ready to use, you are able to monitor the "close" or "open" status of your door from your computer (assuming your access controller has networking function and is connected to a network). |
Face plate: 124L x 32W x 33H (mm) (Plate thickness is 2mm)
Material: Stainless Steel
Voltage: DC 12V
Current: 250mA
Ideal for Wooden and metal door
Also included in the package are THREE (3) new good quality RFID Access Controller.
This unit has the following advantages:
1. High performance.
2. Anti-interference capability / High stability
3. FTP support 26 bit Wiegand, permits maximum distance of 50m from card reader to this console  (included)
4. Read RFID card (sold separately)
This unit must be connected to a console before it can function.
TECHNICAL SPECIFICATION
Operating frequency: 125KHz
Adjustment Mode: ASK
Card: EM & RFID
Distance: 65mm
Respond Time: <0.1sec
Output format: 26bit Wiegand
Operating Voltage: DC5 to 16V
Current Draw: 20-50mA
Storage temperature: -25celcius to +85celcius
Working temperature: -20celcius to +70 celcius
Working humidity: 20%-90%
Dimension: 76mm*45mm*15mm
************************************************************
|
