Note: This "Half" HELMET mic is ideal for Military Personnel who wants the best of headset mic available, with anti-noise microphone.
If you prefer a full helmet mic that covers your ear, then click on this icon
�@
Picture 1: What you see above is what you get, no more no less. Helmet and ruler is not included, they are for illustration only.
Use the above ear mic with our audio adapter and
the ear mic will work with Motorola HT1250. |
Picture 2: This speaker /ear mic will also fit a full helmet that covers your ear. Occasionally, I use this ear mic on my helmet that covers my ear when I go skiing or cycling
�@ |
�@
�@
Here are close-up views of all the components:
Picture 3: Super sensitive mic that picks up your voice and yet filters away the surrounding noise! The mesh is on both sides of the mic holder so that the mic can be attached to either right hand side or left hand side of your helmet! Very flexible design! This mic is covered in a sponge to further remove background noise. If you are riding in a motorcycle or in a combat situation, this combination will ensure you deliver crystal clear message to your buddy, without all the background noise surrounding you.
�@ |
Picture 4a and 4b: Ear/speaker phone (left) and Mic inside sponge (Right). We have inlcuded extra sponges for your ear phone and mic . The O-ring helps fit the mic sponge snugly.
�@ |
Picture 5a and 5b: The plug connects to a socket, which then enables the whole setup to be connected to your radio.
�@ |
Picture 6: Notice that the Ear / speaker phone can rotate 360 degree and at any angle such that it will fit any helmet design.
�@ |
Picture 7a: Notice that the ear phone will fit helmet with shell thickness ranging from 1mm to a maximum thickness of 13mm. If your helmet has a thin shell (say 5 mm), simply add some shim pad and the ear phone will attach itself firmly to your helmet. The setup comes with a locking mechanism as shown in picture 7b below. Picture on the left is in a locked position, and the one on the right is in an unlocked position.
�@ |
Picture 8: Fat PTT button that will accommodate fingers of any sizes, even if you are wearing a thick glove and firing your weapon in a combat situation; or wearing a thick ski glove!
�@ |
Picture 9: Extra thick cable, strong enough for self defense use |
�@ |
�@
Offered here is 20 PIECES new good quality aftermarket "military helmet headset with anti-noise mic" with PTT Switch that works flawlessly with Motorola CP150, CP200, CT150, CT250, CT450, GP68, GP88, GP300, GP308, GP2000, GTX, LTS2000, P040, P080, P100, P110, P1225, PR400, PRO3150, SP10, SP21, SP50 series radios. When you hit the PTT button, the supersensitive "mic" picks up your voice messages, amplifies and converts it into signals suitable for transmission by your radio. Surrounding noise outside the ear will NOT be transmitted, ensuring that your buddy hears ONLY you.
If you purchase an adapter from us , this ear mic will also work with
- GP328/338/329/339/320/140/340/640/360/380/680/1280
- HT750/HT1250 (LS) HT1550XLS HT1550
- PRO5150/5350/5450/5550/7150/7350/7450/7550/7750/9150
- PTX700 Series Radios.
|