5X VTXDXK Ear mic for Vertex Yaesu VX-210 180 Radio V2 w Screws

Picture 1 what you see above is what you get. 3.5mm Single plug with Screws

Offered here is FIVE (5 pieces) of new good quality aftermarket miniature coil tube ear mic, PTT Switch, Microphone that works flawlessly with MOST YAESU SERIES RADIOS such as Yaesu Vertex Transceiver Yaesu FT10, FT40, FT50. Fit Vertex VXF-1, VXF-2, VXF-20, VX-1, VX-2,VX-5, VX10, VX110, VX150, VX160, VX180, VX210, VX300, VX400. No Adapter required   and also ICOM IC-Q7A (No Adapter required).  It enables you to talk and listen without having to remove the radio from your belt.  The earbud conveniently fits in the ear and delivers great sound even in noisy places. Tiny push-to-talk microphone conveniently clips to collar.  A soft rubber ear cushion is provided to ensure comfortable fit.  Our British customer also claimed it works with Icom Q7A (Q7E in Europe) which uses a similar 3.5mm 4 connection plug! We also have the one pin version without screw here:

The following explains its key differences as compared to the cheaper version that we also sell (if you prefer to buy cheaper version, then click on this icon)

First, this more expensive set contains the following replaceable parts.  That way, if one part failed, you can still replace it at a fraction of the total cost.  And you can even share your ear mic with your buddies without worry about hygiene issue.

Picture 2: the mini speaker.  Click on the picture if you want to buy the parts.	Picture 3a, 3b and 3c: the coil tube and "nipple". Click on the picture if you want to buy the parts.  If you prefer a more comfortable "nipple," then click on this icon:
Picture 4: The speaker holder and lapel clip.  Click on the picture if you want to buy the parts.	Picture 5: The big PTT button and mic and lapel clip

Second, the following replaceable parts can be exchanged or replaced easily, and when properly fit, will stay in place snugly.  You don't have to worry whether it will fall apart when used in critical moments:

Picture 6: To fit the tube to the holder, simply plug in and then twist 90 degree until it clicks firmly into place.  This setup will ensure the tube will not be detached from the holder unintentionally.

Picture 7a and 7b: To fit the speaker/cable into the holder, simply plug in and then turn until it clicks firmly into place.  This setup will ensure the speaker/cable setup will not be detached from the holder unintentionally.