|
Picture 1: What you see above is what you
get. Manual is included which is not shown in the photo above.
Offered here is a FIVE
(5) set of
 new good quality
RFID Access Controller D.I.Y. kit & RFID Tokens/Tags that permits door access via password or RFID
Tags
or both.
Package comes with:
-
one RFID
 Access
Controller reader kit, supports up to
1000 users
-
manual
-
2 antennae (you
normally need one but some users may need two, one on the
outside of the door, one for the inside)
-
5 pieces of RFID
Tags per set
(click icon  to buy more)
rated 125KHz
KEY
FEATURES:
Options to open door includes:
1. Password Only (Remote control unit)
2. RID Card Only
(RFID token (
or
)
you can register and deregister various RFID Card/passwords ( i.e. if you need
to deactivate someone's access)
3. Password (Remote control unit) &
RFID Card
/token
(click icons to purchase)
TECHNICAL SPECIFICATION for RFID controller
User capacity : 1000. You can register and deregister various RFID
Cards/passwords ( i.e. if you need to deactivate someone's access)
Operating Temperature : -20?C - 60?C
Operating Humidity: 10%-90%
Card reading proximity: 5 to 15cm in most
instances
All EM card access via hidden kit unit. Unit
is highly reliable and is protected by Master Security Code.
Great for electronic DIY hobbyist who wanted to build a simple electronic high
security door locking system.
Voltage: DC 12V
Instructions:
1. Turn off power supply before installation
2. Connect power to +12V and GND
3. Connect electronic door lock terminal to "+12V"
and "PUSH/NO" for "Normal Open" lock or "NC" for Normal Close lock.
4. Turn on power, and the power LED will flash
indicating everything is ready to function properly.
TECHNICAL SPECIFICATION for Tag
|
Picture 1:
Color is blue
Each tag is pre programmed with a unique ID and there is almost
zero chance (say one in a billion chance) that two token have the
same ID. Comes with key ring.
Rated frequency : 125KHz
|
?
************************************************************
|
