|
Picture 1 what you see above is what you get.
3.5mm Single plug with Screws
Offered here is ONE
(1 piece)
 of new good quality aftermarket miniature coil
tube ear mic, PTT Switch, Microphone that works flawlessly with
MOST YAESU SERIES RADIOS such as
Yaesu Vertex Transceiver Yaesu FT10, FT40, FT50. Fit Vertex VXF-1,
VXF-2, VXF-20, VX-1, VX-2,VX-5, VX10, VX110, VX150, VX160, VX180,
VX210, VX300, VX400. No Adapter required and also
ICOM IC-Q7A (No Adapter required).
It
enables
you
to talk and listen without having to remove the radio from
your belt. The earbud conveniently fits in the ear and delivers
great sound even in noisy places. Tiny push-to-talk microphone
conveniently clips to collar. A soft rubber ear cushion is
provided to ensure comfortable fit. Our British customer also
claimed it works with Icom Q7A (Q7E in Europe) which uses a similar
3.5mm 4 connection plug! We also have the one pin version without screw
here: 
The following explains its key
differences as compared to the cheaper version
 that
we
also sell (if you prefer to buy cheaper version, then click on this
icon)
First, this more expensive set
contains the following replaceable parts. That way, if one part
failed, you can still replace it at a fraction of the total cost.
And you can even share your ear mic with your buddies without worry
about hygiene issue.
Picture 2: the mini
speaker. Click on the picture if you want to buy the parts.
|
 
Picture 3a, 3b and 3c: the
coil tube and "nipple".
Click on the picture if you
want to buy the parts. If you prefer a more comfortable "nipple,"
then click on this icon:
|
Picture 4: The speaker holder
and lapel clip. Click on the picture if you want to buy the parts.
|
Picture 5: The big PTT button
and mic and lapel clip
|
Second, the following replaceable
parts can be exchanged or replaced easily, and when properly fit, will
stay in place snugly. You don't have to worry whether it will
fall apart when used in critical moments:
Picture 6: To fit the tube to
the holder, simply plug in and then twist 90 degree until it clicks
firmly into place. This setup will ensure the tube will not be
detached from the holder unintentionally.
|
 
Picture 7a and 7b: To fit the
speaker/cable into the holder, simply plug in and then turn until it
clicks firmly into place. This setup will ensure the
speaker/cable setup will not be detached from the holder
unintentionally.
|
Please note
that this listed item shown in picture 1 above is one meant for
professionals which include:
1. police
officer
2. fireman
3. military
personnel
4. FBI / CIA /
secret agents
If you are a
novice user
who
use
the
item only rarely (perhaps once a week for a few hours) and in
good working environment (not subject to heat/rain/snow/cold weather),
then you may want to consider cheaper versions highlighted in yellow
below:
|
