|
Picture 1 What you see in
the photo above is what you get. No more no less.
Offered
here
is
a
ONE (1 piece) of new good quality
aftermarket miniature
surveillance kit , PTT Switch, Microphone for
most ALINCO +
STANDARD + ICOM + ADI +
PRYME + MICROTALK + MAXON series radios such as:
ADI AT201, ADI PR640
Cobra HH37ST, HH45WX, HH45WX, MT-500, MT-700, MT-900, PR330, PR500,
PR880, PR900, PR945, PR950DX, PR955DX, PR1000, PR1050WX, PR1100WX,
PR2000, FRS90, FRS100, FRS105, FRS110, FRS115, FRS120, FRS130, FRS220,
FRS225, FRS235, FRS250, FRS250, FRS300, FRS305MA, FRS307, FRS310WX
Motorola Talkabout
Basic, Motorola Plus
Motorola 200, Motorola 250, Motorola Takabout Distance, Motorola
Talkabout Distance DPS
Vertex VX200, Vertex VX500, Vertex VX510
Icom F3, Icom F3S, Icom F4, Icom F4S, Icom H2, Icom H6, Icom J12, Icom
M5, Icom U12, Icom U16
Yaesu FT-10, Yaesu FT-11, Yaesu FT-40, Yaesu FT-41, Yaesu FT-50,
Maxon SL25, Maxon SL55, Maxon SP120, Maxon SP130, Maxon SP140, Maxon
0500 Series, Maxon SP5000 Series
Midland 75-820, Midland 72-822 (will not work on other Midland, we do
have mic targeted mainly for Midland radios, please click on this icon .
For buyers who want Midland mic, I strongly suggest you click on this
icon
instead)
Uniden 040, 042,
044, 052
GME Electrophone
TX6000, TX6200, TX7000
Maycom MH446;
Panasonic KX-TR320;
Ritron Patriot Series RTX, SST, Jobcom JMX, MBX;
Alan, Albrecht,
Alinco, AudioVox, Cherokee, Chief, Marantz, Pryme, Multicom Pro,
Radioshack, Rexon, Stabo, KPO, DNT, Team MiCo, Reer models with 2-pin
plug.
The following explains its key differences as
compared to the cheaper version  that we also sell (if you prefer to buy
cheaper version, then click on this icon)
First,
this
more
expensive
set
contains
the
following replaceable parts. That
way, if one part failed, you can still replace it at a fraction of the
total cost. And you can even share your ear mic with your buddies
without worry about hygiene issue.
|
Picture 2: the mini speaker. Click on the
picture if you want to buy the parts.
|
 
Picture 3a, 3b and 3c: the coil tube and
"nipple".
Click on the picture if you want to buy the
parts. If you prefer a more comfortable "nipple," then click on
this icon:
|
|
Picture 4: The speaker holder and lapel
clip. Click on the picture if you want to buy the parts.
|
Picture 5: The big PTT button and mic and lapel
clip
|
Second,
the
following
replaceable
parts
can
be
exchanged or replaced easily,
and when properly fit, will stay in place snugly. You don't have
to
worry whether it will fall apart when used in critical moments:
|
Picture
6: To fit the tube to the holder, simply plug in and then twist 90
degree until it clicks firmly into place. This setup will ensure
the
tube will not be detached from the holder unintentionally.
|
 
Picture
7a and 7b: To fit the speaker/cable into the holder, simply plug in and
then turn until it clicks firmly into place. This setup will
ensure
the speaker/cable setup will not be detached from the holder
unintentionally.
|
Please
note
that
this
listed
item
shown in picture 1 above is one meant for
professionals which include:
1.
police
officer
2.
fireman
3.
military
personnel
4.
FBI
/
CIA
/
secret
agents
If you are a novice user
who
use
the
item
only
rarely
(perhaps once a week for a few hours) and in
good working environment (not subject to heat/rain/snow/cold weather),
then you may want to consider cheaper versions highlighted in yellow
below in our Alternative Section.
|
