Picture 1 What you see in the photo above is what you get. No more no less.
Use the above ear mic with our audio adapter
the ear mic will work with Motorola HT1250
Offered here is a
ONE (1 piece) of new good quality aftermarket miniature surveillance kit , PTT Switch, Microphone for
- AP Models: AP10, AP50
- CT Models:
CT150, CT250, CT450, CT450LS
- CLS Models:
CLS1110, CLS1410, CLS1413, CLS1450, CLS1450C
- CP Models: CP88, CP100, CP150, CP200 VHF / UHF
- GP & SP Models: GP68, GP88, GP88S, GP300, GP 308, GP2000, GP2100,
- SP10, SP21, SP50
- P Models:
P040, P080, P110, P200, P1225, P1225LS, PR400
- PRO Models:
PRO1150, PRO2150, PRO3150
- Motorola VHF / UHF Spirit, Spirit Pro, Spirit Pro+ inclusive of SV10, SV11, SV11D, SV21, SV12, SV22, SV22C, SU210, SU22, SU22C, SU220, MV11, MV11CV, MV12, MV12CV, MV21C, MV21CV, MV22, MV22CV, MU11, MU11C, MU11CV, MU12, MU12C, MU12CV, MU21C, MU21CV, MU22CVS, MU24CV, MU24CVS, MU24CVST
- XTN Models: XTN446, XTN500, XTN600, XV1100, XV210, XV2600, XU1100, XU2100, XU2600
- And others such as:
ECP100, GTI, GTX, LTS2000, PMR446, VL50, VL130
If you purchase an adapter from us , this ear mic will also work with
- HT750/HT1250 (LS) HT1550XLS HT1550
- PTX700 Series Radios.
The following explains its key differences as compared to the cheaper version
that we also sell (if you prefer to buy cheaper version, then click on this icon)
First, this more expensive set contains the following replaceable parts. That way, if one part failed, you can still replace it at a fraction of the total cost. And you can even share your ear mic with your buddies without worry about hygiene issue.
Picture 2: the mini speaker. Click on the picture if you want to buy the parts.
Picture 3a, 3b and 3c: the coil tube and "nipple".
Click on the picture if you want to buy the parts. If you prefer a more comfortable "nipple," then click on this icon:
Picture 4: The speaker holder and lapel clip. Click on the picture if you want to buy the parts.
Picture 5: The big PTT button and mic and lapel clip
Second, the following replaceable parts can be exchanged or replaced easily, and when properly fit, will stay in place snugly. You don't have to worry whether it will fall apart when used in critical moments:
Picture 6: To fit the tube to the holder, simply plug in and then twist 90 degree until it clicks firmly into place. This setup will ensure the tube will not be detached from the holder unintentionally.
Picture 7a and 7b: To fit the speaker/cable into the holder, simply plug in and then turn until it clicks firmly into place. This setup will ensure the speaker/cable setup will not be detached from the holder unintentionally.