Offered here is ONE PIECE (1) new good quality aftermarket cable for connecting 2 Motorola mobiles "Back to Back" directly; it is a DIRECT CONNECTION LOW COST REPEATER control interface cable. It is brand new 16-pin plug kit. No soldering work to be done, as this unit has been factory built. At this point, I know it connects two Radius GM300 together /back-to-back. Also works with Motorola M120. As for other models, I am not sure yet. This is NOT a RICK REPEATER INTERFACE CABLES.
You don?t have to spend lots of money on expensive controller or RICK type unit to build a simple FM repeater that meets the need of most business and amateur. Our cable enables you to connect two radios back to back. You can then set one radio as the receiver at a particular receiving frequency (say RF). You then set the other radio as the transmitter at a particular transmitting frequency (say TF). When the receiver picks up a signal at RF, it will send out the signal via the second radio at frequency TF. This cable is a "bi-directional" cable that allows receive and transmit from both radios (full duplex). If you want a simplex or uni-directional cable, then click on this link
Once again, this is NOT a RICK cable. It won?t connect any Motorola mobile radios TO ANY OF THE DIFFERENT MOTOROLA CONTROLLER MODELS OR A R.I.C.K. UNIT
What you see in picture one is what you get, no more no less. Software and manual is not included.
Cable is approximately 15 inch in length (tip to tip), +/- 1 inch, more than sufficient for normal usage. PLEASE NOTE: This cable is a "bi-directional" cable that allows receive and transmit from both radios (full duplex). If you want a simplex or uni-directional cable, then click on this icon 
