|
Picture 1: What you see above is what you get.
Package comes with
-
Water resistant RFID  Access Controller made of stainless steel, ideal for outdoor use.
-
PDF manual will be emailed to buyer after purchase.
-
One RFID Card (click icon  to buy more)
-
One RFID Key Chain (click icon  to buy more)
PRODUCT DESCRIPTION
Offered here is a ONE (1) new good quality  RFID Access Controller & RFID Card that permits door access via password or RFID card or both.
KEY FEATURES:
Options to open door includes:
1. Password Only
2. RID Card Only (RFID token (or ) you can register and deregister various RFID Card/passwords ( i.e. if you need to deactivate someone's access)
3. Password & RFID Card /token (click icons to purchase)
Three user levels: Normal user, Secure user and Master user
Three operational modes: Normal mode, Bypass mode and Secure mode
"Code search" feature that helps make maintaining user codes easier
Input for Request to EXit (REX) button
Comes with mounting template for easier installation
Solid stainless steel Case and Back are all tamper proof; in case of tampering (the case is opened or removed from the wall), the unit will emit an alarm electrical signal to optional attached bell/chime/siren or strobe device to warn about tampering by an intruder. The siren time can be programmed to last 0 to 9 minutes.
TECHNICAL SPECIFICATION
? User capacity : 500. You can register and deregister various RFID Cards/passwords ( i.e. if you need to deactivate someone's access)
? Operating Temperature : -10?C - 60?C
? Operating Humidity: 10%-90%
? Card reading proximity: 5 to 15cm in most instances
? Operating Voltage Range (from a regulated power supply) : DC 12V to 24V
? Operating Voltage Range (from a transformer) : AC 16V
? Max input current (not including attached device): standby is 40mA, max is 130mA
? Water resistant RFID Access Controller made of stainless steel, ideal for outdoor use.
? Size: 120(L)*76(W)*27(H)mm or 4.72" * 3" * 1"
? Weight of controller = 410gram or 0.9LB
If you prefer one with networking function, then click on this icon: 
ATTENTION 1: Please note that electric strike can connect directly to access control unit such as  or  listed below, but we do not suggest buyer to do so because it will shorten the lifespan of your access control unit due to high current passing through the electric strike. Instead, you should connect the strike directly to an intelligent uninterruptible power supply (UPS)  that has NC/NO output. Make sure your UPS is "intelligent" meaning that it has NC or NO power output and can receive "door open" signal input from your access control.
ATTENTION 2: Normally Opened (NO) or Fail-secure rated electric strike remains locked during loss of power supply. Normally Closed (NC) or Fail-safe rated electric strike requires power to stay locked. When power is lost (such as a blackout), NC or fail-safe Electric Lock Strikes will remain unlocked until power is restored. Electric Strike that is NO rated may not be compliant with your local building / fire safety code. We personally feel that NC rated electric strike is safer. Buyer should check with their local safety code before making decision to buy a NC or NO rated electric strike. In order to ensure that power supply is not intentionally lost (in the event of theft/burglary), we suggest buyer to buy an Uninterruptible Power Supply shown below.
|
